You go out to the pump house to turn on the pump, but there’s no water coming out.
What do you do? It can be frustrating when your well pump isn’t pumping water as it should.
This can leave you with a number of problems, such as not having enough water for your needs or even worse, running out of water completely.
Don’t worry, we’re here to help.
In this article, we’ll teach you how to fix a well pump not pumping water or holding pressure properly so you can get back to having a steady flow of fresh water coming into your home.
Read on to find out more about well pump care.
Step 1: Check the Pressure Switch
Troubleshooting well pumps can be intimidating, but it doesn’t have to be.
Checking the pressure switch is usually the best place to start.
This is because it’s one of the most common reasons why the pump may not be working.
To do this, look for a lever or button on the pressure switch and press it or flip it to reset.
If there’s an air pressure tank connected to your well pump, make sure that its reading is 2 psi higher than the cut-in setting of your particular model — this could also be causing issues with your well pump.
It’s recommended that you refer to its manual for further instruction in properly adjusting these settings.
Step 2: Check to See if There Is a Power Supply Problem
If there is an issue with the well pump not pumping water, it’s important to first check if there is a power supply problem.
This involves examining all wiring connections to make sure they are properly attached and secure.
Check all circuit breakers for potential outages or fuse problems, and ensure that the pump is receiving power from its control box.
Step 3: Inspect the Well for Any Obstruction
Inspecting for any obstructions or blockages in the well piping system is an important and necessary step to take when trying to fix a well pump that isn’t pumping water.
If you find something is blocking the flow of water, it will need to be taken care of before the pump can work correctly.
Additionally, make sure that your water filter is not clogged.
If it is, then this too can influence the amount of water your pump supplies.
Step 4: Check the Impeller
If your well pump isn’t pumping water, the fourth step in troubleshooting it should be to check for any rocks or debris that could be obstructing the impeller.
The impeller is a rotor located at the bottom of the pump and if blocked, then you’ll need to remove and clean it in order to restore normal function.
Step 5: Contact a Professional for Assistance
If you’re still having well pump problems, contact a professional for further assistance.
A specialist will be able to diagnose and fix any underlying issues you may have with your system.
They will also be able to advise you if it’s time to replace your well pump entirely in order to ensure its longevity and performance.
Is Your Well Pump Not Pumping Water?
Although this problem may seem daunting at first, there are a few steps that you can take to try to fix the issue on your own but you may still need help to get it fixed and with ongoing well pump maintenance.
So, if you find your well pump not pumping water after following these tips, it’s time to call a professional.
For more helpful posts like this one, be sure to check out our blog!
Is your well pump on the fritz? If the steps above don’t solve your problem, you’ll need the help of a residential well pump repair business. Empire Pump specializes in helping businesses and homeowners with all of their well testing, installation, and maintenance needs. Call 623-582-5069 now to get a quote or schedule an appointment!
Read related articles:
Well Water Testing in Phoenix: Tips for Real Estate Agents
Water Well Pump Installation on a Budget